La description

Roof Wall panel roll forming machine for decorative can produce material thickness range 0.3-0.8mm, material PPGI, galvalume steel and galvanized steel, also we can customize the machine according to your drawing, specially the pitch and height of each wave, for the machine speed, we can do normal speed 8-12m/min.

Roof Wall panel roll forming machine for decorative design is unit one, which means the control box and motor are all put under the machine frame, when you get the machine, no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working. It saves more time and space.

Profile Drawing of Roof Wall panel roll forming machine for decorative

Technological Process of Roof Wall panel roll forming machine for decorative

Uncoiling—Feeding with guide—Pre-cutting—Roll forming—Cutting—Products collecting

Technical Data of Roof Wall panel roll forming machine for decorative

1. 5 Tons Hydraulic Un-coiler

• Diamètre intérieur de la bobine : ￠460-520mm
• Max out diameter of the coil: ￠1300mm
• Largeur maximale de la bobine : 1250 mm

2. Pre-cutting Device

3. Roll Forming Machine

• Rolling Speed: About 10-12m/min
• Steel sheetThickness: 3 mm to 0.8mm PPGI, Galvanized Steel
• Roller Stations:about 24 stations
• Matériau du rouleau : acier forgé 45#, recouvert de chrome
• Matériau de l'arbre et diamètre : ￠76 mm, le matériau est en acier forgé 45#, chrome avec trempe.
• Puissance du moteur principal : 5kw
• Pression hydraulique : 12Mpa
• Power supplier: 380V, 50HZ,3 phaseor customized as customer’s requirement
• Mode de conduite : par chaîne
• Couleur de la machine : bleue ou adaptée aux besoins du client
• The size of the forming machine: About 10500*1000*1200mm
• Poids de la machine : environ 10 tonnes
• Control system: PLC control panelwith touching screen

Our machine design is unit one, which means the control box and motor are all put under the machine frame, when you get the machine, no need to assemble and connect the complicate cable of the machine, then the machine is working. It saves more time and space.

4. Hydraulic cutting

(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12Mov with heat treatment
(3) Length measuring: Automatically
(4) The cutting thickness: 0.3- 0.8mm
(5) Hydraulic Station Power: 4 KW

5. Out Table

Il adopte de l'acier soudé et un rouleau supporté pour transmettre les produits.

Taille：4000*1350*1200mm

6. Control Box

(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
(2) mesure automatique de la longueur et de la quantité ;
(3) Length & quantity controlled by PLC
(4) L'imprécision de longueur peut être modifiée facilement.
(5) Control panel: Button-type switch and touch screen
(6) Unit of length: millimeter (switched on the control panel)

Spare Parts