Keterangan

For Roll forming machine China for Automatically PPGI Fence Panel system, we need three machines, which is fencing sheet machine, fencing post machine, fence rail machine, the material thickness is 0.4-0.7mm, material will be galvanized steel or color steel, automatic cut any length you want, fencing is very popular in Australia, New Zealand.

The Roll forming machine China for Automatically PPGI Fence Panel consists of decoiler, roll forming system, and cut to length by hydraulic cutting, receiving table, etc.

Roll forming machine China for Automatically PPGI Fence Panel can be installed on top of limestone walls with panels stepped, post and rail fencing is a traditional and cost-effective form of fencing. Its simple design makes it the ideal choice for a DIY project, especially on sloping sites and uneven ground, and it is widely used for house garden, school, factory, etc.

Profil produk

(Berdasarkan kebutuhan pelanggan untuk mendesain)

Proses teknologi

Uncoiling—Feeding with guide——Roll forming—Cutting—Products collecting

Data teknis

1. Un-coiler

• 5 ton decoiler pasif
• Coil inner Diameter: ￠450-550mm
• Max out diameter of the coil:￠1500mm
• Lebar Kumparan Maks: 1250mm

2. Mesin pembentuk gulungan

• Rolling Speed: About 8-12m/min
• Steel sheet Thickness: 45 mm to 0.7mm PPGI,Galvanized Steel
• Roller Stations:about 18 stations
• Bahan Rol : Baja tempa 45#, dilapisi dengan krom
• Bahan Poros dan DIA: ￠76mm, bahannya adalah baja tempa 45#, Chrome dengan pendinginan
• MainMotor Power:5kw
• Hydraulic Pressure:12Mpa
• Power supplier: 380V, 50HZ,3 phase or customized as customer’s requirement
• Way Of Drive:bychain
• Color Of The Machine:blue or customized
• The size of the forming machine:About 8500*1500*1500mm
• Machine weight: about 8 tons
• Control system: PLC control panel with touching screen

3. Pemotongan Hidrolik

• Gerakan pemotongan: Mesin utama berhenti dan kemudian memotong secara otomatis. Setelah pemotongan, mesin utama akan hidup kembali secara otomatis.
• Bahan pisau: CR12Mov dengan perlakuan panas
• Pengukuran panjang: Secara otomatis
• Ketebalan pemotongan: 0,3- 0,8 mm
• Daya Stasiun Hidrolik: 4 KW

4. Out table

• Ini mengadopsi baja yang dilas dan roller yang didukung untuk mengirimkan produk.
• Size：4000*1350*1200mm

5. Control Box

• Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requirement)
• Pengukuran panjang & kuantitas secara otomatis;
• Panjang & kuantitas dikendalikan oleh PLC,
• Ketidaktepatan panjang dapat diubah dengan mudah.
• Panel kontrol: Sakelar tipe tombol dan layar sentuh
• Bahasa di layar sentuh: Inggris dan Cina
• Satuan panjang: milimeter (diaktifkan pada panel kontrol)