Keterangan
Parameter
| Keterangan | |
| Item | Spesifikasi |
| Ketebalan bahan |
1.5 mm galvanized coils
|
| Un Coiler | manual 3 ton |
| Kecepatan bergulir | About 10m/min |
| Stasiun Rol |
About 12 stations
|
| Bahan Rol |
Gcr15 coated with chrome
|
| Daya Motor Maim | 7.5kw |
| Motor cutting Power | 5.5kw |
| Bahan Pemotongan |
CR12mov with quench treatment
|
| Kekerasan | HRC58-62 |
| Sistem pengaturan |
PLC (Panasonic) as list in the note
|
| Bobot | About 8 tons |
| Cara Berkendara | 1.2 inch chain |
Proses teknologi:
Uncoiling——Servofeeding——hydraulicPunching—Rollforming—Cutting ——Products collecting
The external of Fire Damper Mesin Roll Forming
| Item |
Spesifikasi
|
|
|
Bahan kumparan
|
Ketebalan bahan |
1.0-1.5 mm galvanized coils
|
| Un Coiler | 3 tons hydraulic | |
| Servo feeding | Motor | Delta 1.8kw |
| Perangkat meninju | Punching |
4 sets of punching die
|
|
Membentuk sistem
|
Kecepatan Pembentukan |
About 2-3pieces/min
|
| Stasiun Rol | Sekitar 16 stasiun | |
| Bahan Rol |
Gcr15 coated with chrome
|
|
| Daya Motor Maim | 7.5kw | |
| Motor cutting Power | 5.5kw | |
|
Pemotongan
sistem |
Bahan Pemotongan |
CR12mov with quench treatment
|
| Kekerasan | HRC58-62 | |
| Toleransi | ±1,5mm | |
| Pisau pemotong | 1 set | |
|
Sistem kontrol listrik
|
Sumber Listrik |
380V, 50HZ, 3 fase
Also, can satisfy Customer’s requirey |
| Sistem pengaturan |
PLC Delta as list in the note
|
|
| Bobot | About 8 tons | |
| Cara Berkendara | 1.2 inch chain | |
| Ukuran mesin | mm |
10000mm*700mm*1000mm
|
Detail dari setiap komposisi
1. De-coiler: 3 ton hydraulic de-coiler
2. Hydraulic punching with servo feeder
3. Hydraulic cutting device
- Gerakan pemotongan: Mesin utama berhenti dan kemudian memotong secara otomatis. Setelah pemotongan, mesin utama akan hidup kembali secara otomatis.
- Material of blade: CR12 with heat treatment
- Pengukuran panjang: Secara otomatis
- Toleransi panjang: + 1,5mm
4. Kotak Kontrol
- Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
- Pengukuran panjang & kuantitas secara otomatis;
- Length & quantity controlled by PLC, Delta
- Ketidaktepatan panjang dapat diubah dengan mudah.
- Panel kontrol: Sakelar tipe tombol dan layar sentuh
- Satuan panjang: milimeter (diaktifkan pada panel kontrol)
Ulasan
Belum ada ulasan.