R panel roll forming machine can produce material thickness range 0.3-0.8mm or 0.12-0.4mm, material PPGI, galvalume steel and galvanized steel, also we can customize the machine according to your drawing.

This machine design is unit one, which means the control box and motor are all put under the machine frame, when you get the machine, no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working. It saves more time and space.

Profile Drawing

Technological process

Uncoiling—Feeding with guide—Roll forming—Cutting—Products collecting

The main description

Technical Data

1. Decoiler: 5 tons passive decoiler

• Coil inner Diameter: ￠460mm～520mm
• Max out diameter of the coil: ￠800mm
• Expansion: with 4 palms, with brake
• Max Coil Width: 500mm

2. Cutting

• Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
• Material of blade: CR12Mov with heat treatment
• Length measuring: Automatically
• The cutting thickness: 0.3- 0.8mm
• Hydraulic Station Power: 4 KW

3. Out table

• It adopts welded steel and supported roller to transmit the products, which is used to collect the finished products.
• Length : 2 meters

4. Control Box

• Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
• Length & quantity measurement automatically;
• Length & quantity controlled by PLC
• Length inaccuracy can be amended easily.
• Control panel: Button-type switch and touch screen
• Unit of length: millimeter (switched on the control panel)