Description

Roof Wall panel roll forming machine for decorative can produce material thickness range 0.3-0.8mm, material PPGI, galvalume steel and galvanized steel, also we can customize the machine according to your drawing, specially the pitch and height of each wave, for the machine speed, we can do normal speed 8-12m/min.

Roof Wall panel roll forming machine for decorative design is unit one, which means the control box and motor are all put under the machine frame, when you get the machine, no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working. It saves more time and space.

Profile Drawing of Roof Wall panel roll forming machine for decorative

Technological Process of Roof Wall panel roll forming machine for decorative

Uncoiling—Feeding with guide—Pre-cutting—Roll forming—Cutting—Products collecting

Technical Data of Roof Wall panel roll forming machine for decorative

1. 5 Tons Hydraulic Un-coiler

• Coil inner Diameter: ￠460-520mm
• Max out diameter of the coil: ￠1300mm
• Max Coil Width: 1250mm

2. Pre-cutting Device

3. Roll Forming Machine

• Rolling Speed: About 10-12m/min
• Steel sheetThickness: 3 mm to 0.8mm PPGI, Galvanized Steel
• Roller Stations:about 24 stations
• Roller Material : 45# forge steel, coated with chrome
• Shaft Material and DIA: ￠76mm,material is 45# forge steel, Chrome with quenching
• MainMotor Power:5kw
• Hydraulic Pressure:12Mpa
• Power supplier: 380V, 50HZ,3 phaseor customized as customer’s requirement
• Way Of Drive:bychain
• Color Of The Machine:blue or customized
• The size of the forming machine: About 10500*1000*1200mm
• Machine weight: about 10 tons
• Control system: PLC control panelwith touching screen

Our machine design is unit one, which means the control box and motor are all put under the machine frame, when you get the machine, no need to assemble and connect the complicate cable of the machine, then the machine is working. It saves more time and space.

4. Hydraulic cutting

(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12Mov with heat treatment
(3) Length measuring: Automatically
(4) The cutting thickness: 0.3- 0.8mm
(5) Hydraulic Station Power: 4 KW

5. Out Table

It adopts welded steel and supported roller to transmit the products.

Size：4000*1350*1200mm

6. Control Box

(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
(2) Length & quantity measurement automatically;
(3) Length & quantity controlled by PLC
(4) Length inaccuracy can be amended easily.
(5) Control panel: Button-type switch and touch screen
(6) Unit of length: millimeter (switched on the control panel)

Spare Parts