विवरण
Working flow of snap clip lock metal roof panel roll forming machine
Uncoiling—Feeding with guide——Roll forming—hydraulic cutting—Products collecting
मशीन सूची | 5 ton passive de-coiler | 1 सेट |
Feeding guide | 1 सेट | |
मुख्य रोल बनाने की मशीन | 1 सेट | |
पीएलसी नियंत्रण बॉक्स | एक इकाई | |
हाइड्रोलिक स्टेशन | एक इकाई | |
हाइड्रोलिक कटिंग | 1 सेट | |
4 meters out tables | एक इकाई | |
स्पेयर पार्ट्स | 1 पैकेज | |
सुरक्षा कवच | 1 सेट |
B. Technical Data of snap clip lock metal roof panel roll forming machine
मद संख्या |
विवरण |
Unit\Type | RF-RP |
1 | द्रव्य का गाढ़ापन | मिमी | 0.7-1.2mm aluminum sheet, 0.5-0.8mm Color coated steel |
2 | बनाने की गति | m/min | 8-12 |
3 | Roller stands | stand | About 16 |
4 | रोलर सामग्री | 45# steel, coated with chrome, fire treated, HRC 58-62 | |
5 | Shaft diameter and material | Ф75, 45# steel, fire treated, HRC 58-62 | |
5 | मुख्य मोटर शक्ति | KW | 7.5 |
6 | Hydraulic cutting Power | KW | 4 |
7 | Hydraulic pressure | Mpa | 12 |
8 | Power Supply | 380 वी, 50 हर्ट्ज, 3 चरण | |
9 | सहनशीलता | मिमी | +-1.5 |
10 | काटने की सामग्री | Cr12Mov | |
11 | नियंत्रण प्रणाली | टच स्क्रीन के साथ पीएलसी | |
12 | Main machine weight | T | About 6 Ton |
13 | Outer specification | m | About 7.5*1.1*1.2m |
14 | Transmission Type | chain drive |
तकनीकी डाटा of Hidden type metal roof snap lock roll forming machine
1.Un-coiler
5 tons passive decoiler
कुंडल भीतरी व्यास: ¢460-520mm
Max out diameter of the coil: ¢1250mm
Max Coil Width: 800mm
2.Hydraulic काट रहा है
(1) Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start.
(2) Material of blade: CR12Mov with heat treatment
(3) Length measuring: Automatic length measuring
(4) Tolerance of length: +/- 1.5mm
3.आउट टेबल
It adopts welded steel and supported roller to transmit the products.
Size:4000*800*1000mm
4.कंट्रोल बॉक्स
(1) Voltage, Frequency, Phase: 380V, 50 Hz, 3Phase
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily.
(6) कंट्रोल पैनल: बटन-टाइप स्विच और टच स्क्रीन
(7) Unit of length: millimeter (switched on the control panel)
बिक्री के लिए रूफ पैनल रोल बनाने की मशीन खरीदते समय विचार करने वाली 5 बातें
समीक्षा
अभी तक कोई समीक्षा नहीं।