Manfaat utama dari mesin roll forming fascia

Fascia roll forming machines are essential equipment for the efficient production of fascia panels used widely in the construction industry. This comprehensive guide provides a detailed overview of fascia roll formers covering their key features, types, specifications, applications, installation, operation, maintenance, suppliers, prices and more.

Overview of Fascia Roll Forming Machines

Fascia roll forming machines take flat metal coil stock and progressively bend it into custom fascia panel profiles through a series of rollers. They create lengthy, continuous panels without welding for roof edging, soffits, fascias and gutters.

Compared to other panel forming methods, roll forming is faster, more efficient and cost-effective for producing large volumes of panels in custom profiles. It delivers consistent quality and durability. Roll formed panels are lightweight yet strong and rigid.

Key benefits of fascia roll forming machines:

  • High speed production of long, seamless metal fascia panels
  • Ability to create custom profiles not limited to standard sizes
  • Consistent panel quality and structural integrity
  • Cost savings from automation and raw material efficiency
  • Minimal tooling requirements for profile changeovers
  • Flexibility to produce panels in different metals and colors
  • Just-in-time production improves inventory management
  • Safer working environment compared to fabricating on site
mesin pembentuk gulungan fasia
Key benefits of fascia roll forming machines 5

Types of Fascia Roll Forming Machines

There are two main types of fascia roll formers:

C-Type Fascia Roll Forming Machines

C-type roll formers have a C-shaped frame design with forming stations arranged inside the C. They utilize vertical rollers and feature a cantilevered roll stack.

Keuntungan:

  • Jejak yang ringkas
  • Mudah dioperasikan dan dirawat
  • Lower cost for simple profiles

Keterbatasan:

  • Limited forming capability for complex profiles
  • Access inside C-frame can be restricted

O-Type Fascia Roll Forming Machines

O-type roll formers have an O-shaped frame with horizontal roller stations situated outside the O for easier access. They use pioneering wrap-around tooling for increased forming capability.

Keuntungan:

  • Advanced roll designs produce complex profiles
  • Better access to roll tooling improves changeovers
  • Larger product range and customization ability

Keterbatasan:

  • Larger machine footprint
  • Higher initial capital cost

Hybrid Fascia Roll Forming Machines

Hybrid fascia roll formers combine vertical C-frame stations with exterior horizontal rolls. This allows forming more complex profiles than C-type machines, while maintaining a compact footprint.

Key Components of a Fascia Roll Forming Machine

Fascia roll formers are equipped with the following components:

  • Decoiler – Feeds raw coil stock into the roll forming line. Includes powered unwinding system and coil guides.
  • Meja pakan – Provides support for coil strip entering the roll station. Keeps material aligned.
  • Stasiun pembentuk gulungan – Progressive bending of strip through consecutive roller dies to shape profile.
  • Unit tinju – Optional for creating holes or notches in the fascia panel.
  • Shearing unit – Cuts formed panels to required length after exiting the roll forming line.
  • Konveyor – Transports panels from the line exit point. Used for stacking.
  • Electrical control cabinet – Houses the automation system and controls machine operation.

Specifications of Fascia Roll Forming Machines

Fascia roll former technical specifications determine production capabilities and output quality:

SpesifikasiDetail
Kecepatan pembentukanLinear speed of panel through the roll stations, typically 10-15 m/min. Higher speed increases output.
Lebar kerjaMaximum panel width that can be formed, usually 650-3000 mm. Wider capacity produces more panels per coil.
Kapasitas ketebalanMinimum and maximum sheet metal thickness that can be formed, generally 0.3-2.0 mm.
Coil ID rangeInner diameter size of coils that can be used, typically 405-610 mm. Larger ID enables longer production runs.
Tinggi profilMaximum fascia profile height that can be achieved, up to 300 mm. More roll stations allow higher profiles.
Number of roller diesMore stations (10-24) allow longer and more complex profiles. May include upper, lower, side and wrapping rolls.
Jenis bahanCommon materials include steel, aluminum, zinc, copper. Some machines offer multi-metal flexibility.
Surface coatingPre-painted, galvanized, stainless steel, anodized aluminum materials can be formed.
Melubangi lubangOptional punching unit for holes, louvres or notches if required in panel.
Tooling setsNumber of dedicated tooling sets for different profiles available for the machine. More tooling sets reduce changeover time.
OtomatisasiLevel of automated operation, monitoring and control features.
Berat mesinHeavier machines (6-12 tons) offer greater stability for accuracy.

Applications and Uses of Fascia Roll Forming Machines

Fascia roll formers produce panels for the following applications:

  • Roof fascias – Outer edging for roof overhangs and eaves. Provides an aesthetic finish.
  • Soffits – Underside covering of overhanging roof eaves. Protects from weather.
  • Gutters – Channels that collect and drain rainwater from the roof edge.
  • Parapet wall cladding – Vertical metal fascia coverings on building exteriors.
  • Pintu dan jendela berkedip – Weather resistant panels around openings.
  • Building trim – Decorative finish trims along walls, corners or openings.
  • Pelapis dinding – Exterior siding panels for walls made of metal.
  • Atap – Curving panels for metal roofs.
  • Papan nama – Branded fascia panels for retail and office buildings.
  • Ventilated facades – Exterior cladding with airflow cavity behind.
  • Sun shading – Extended fascia panels creating overhangs for shading.

With custom tooling, fascia roll forming machines allow architects the design freedom to realize unique aesthetics for buildings.

mesin pembentuk gulungan fasia
Key benefits of fascia roll forming machines 6

Choosing a Fascia Roll Forming Machine Supplier

Selecting the right fascia roll former supplier for your production requirements is key. Below are important factors to consider:

Machine Quality: The supplier should use precision engineered components from leading brands and rigorous machining standards. This ensures consistent quality panels, minimal downtime and long equipment lifespan.

Technical Expertise: Look for an experienced supplier with in-depth technical know-how in fascia roll forming to provide the right machine recommendations and design support.

Customization Ability: Supplier should offer customized machine design to meet your exact fascia panel requirements rather than just pre-configured models.

Quality Certification: Reputable ISO 9001 certified suppliers adhere to strict quality control and international manufacturing standards.

** responsive Support:** Choose a supplier responsive to technical queries and service requests to minimize downtime. Quick turnaround on spare parts is vital.

Pelatihan: Opt for suppliers who provide operator training on proper machine use, maintenance and safety procedures.

Proven Reliability: Check client references and case studies to verify supplier reputation and their machine’s reliability and durability.

Biaya: Balance cost against machine quality, features and after-sales support rather than just lowest price. Consider total long term value.

Fascia Roll Forming Machine Prices

Fascia roll former prices vary based on factors like:

  • Machine size and capacity
  • Level of automation and additional features
  • Complexity of fascia panel profile
  • Raw material used – steel, aluminum etc.
  • Production speed and output requirements
  • Reputation and quality of equipment brand

Kisaran harga yang umum:

Jenis MesinKisaran Harga
Manual C-type roll former$8,000 – $15,000
Automatic C-type roll former$15,000 – $25,000
Automatic O-type roll former$25,000 – $50,000
High-speed O-type roll former$50,000 – $80,000
Large width roll former$80,000 – $120,000
Custom large roll former$100,000+

Get price quotes from minimum 3 suppliers before purchasing. Evaluate long-term costs like operation, maintenance and tooling changes rather than just unit price.

How to Install and Operate a Fascia Roll Former

Proper installation and operation maximizes productivity and longevity of your fascia roll forming machine. Here are key guidelines:

Persiapan Lokasi

  • Prepare solid, level foundation to avoid vibration during operation.
  • Ensure sufficient space around the equipment for safe access.
  • Have required utilities like power supply and compressed air available nearby.

Pemosisian

  • Use castors to move the machine components into position.
  • Align and bolt together the roll former sections tightly.
  • Adjust roller stations to required forming profile.

Komisioning

  • Verify electrical, pneumatic and hydraulic connections.
  • Power up to test machinefunctions without feed stock.
  • Make final calibrations to achieve desired panel profile.

Uji Coba

  • Thread coil material through the decoiler, tables and roll stations.
  • Run at low speed checking alignment through the sections.
  • Inspect first panels to validate profile dimensions and quality.
  • Make any fine adjustments to rollers before production run.

Production Operation

  • Maintain consistent coil tension and alignment into the rolls.
  • Periodically check panel length, punching quality and cut edge.
  • Monitor for any abnormal vibrations, noises or heating up.
  • Use recommended machine settings for optimal output.
  • Safely collect panels exiting the line.

Perawatan Pencegahan

  • Clean machine daily removing metal dust and particles.
  • Lubricate rollers, bearings, chains and guides regularly.
  • Check hydraulic systems and pneumatic pressure as required.
  • Inspect all assemblies for loose parts or wear periodically.
  • Replace any damaged or worn components immediately.

Fascia Roll Former Maintenance Guide

Proper maintenance is crucial for smooth operation and maximum working life of fascia roll forming machines. Here are key maintenance activities and schedules to follow:

TugasFrekuensiMetode
PembersihanSetiap hariRemove metal chips and dust from rollers, tables, conveyors using brush and vacuum.
InspeksiSetiap hariCheck for leaks, loose parts, unusual noises. Monitor coil line tension.
PelumasanMingguanApply machine oil to bearings, chains, guides. Grease gear boxes if equipped.
Roller MaintenanceBulananExamine rollers for wear or damage. Replace immediately if found.
Hydraulics InspectionBulananCheck hydraulic fluid level and lines/fittings for leakage.
Pneumatic InspectionBulananEnsure air pressure set point. Examine lines and cylinders for leakage.
Electrical InspectionBulananCheck panels, cabinets and connections for damage. Tighten any loose wiring.
Machine CalibrationTriwulanValidate panel dimensions and make alignment adjustments if required.
Sistem KeamananTriwulanTest emergency stops, safety switches and guards are functional.

Keep maintenance logs to record all inspections, repairs, parts replacements. Schedule annual service by machine manufacturer.

mesin pembentuk gulungan fasia
Key benefits of fascia roll forming machines 7

How to Choose Fascia Profile Tooling

Choosing suitable tooling is key to achieving your required fascia panel profile and quality when purchasing a new roll former:

  • Provide supplier detailed drawings of desired fascia panel shape including dimensions.
  • Consider if you need standard or custom tooling designed for your profile. Custom tools may cost 20-50% more.
  • Tooling should fit machine model and be sized for your maximum panel width.
  • Specify the metal thickness and type e.g. 0.7 mm galvanized steel that tooling must handle.
  • Request at least 2 sets of tooling for each profile to allow quick changeovers.
  • Tooling should withstand high cyclical loading without damage or roll marks.
  • Roller materials like cast iron or stainless steel provide durability for long production runs.
  • Tooling tolerances should match your product precision requirements.
  • Request supplier to provide tooling layout drawings for your approval before manufacturing.
  • Tooling cost is ~10-15% of total machine price depending on complexity and size.
  • Ensure supplier stocks critical tooling components for quick replacement when required.

Comparing C-Type and O-Type Fascia Roll Forming Machines

Choosing between C-type and O-type fascia roll formers depends on your production needs:

ParameterPembentuk Gulungan Tipe-CPembentuk Gulungan Tipe-O
Investment Cost$ – Lower cost$$ – Higher cost
Machine FootprintLebih kecilLebih besar
Kompleksitas ProfilProfil sederhanaComplex profiles possible
Presisi ProfilBagusSuperior
Waktu Pergantian**Faster **Slower
Operator AccessRestrictedFull access for maintenance
Volume produksiLower volumeHigher volume
Kecepatan JalurHingga 10 m/menitHingga 20 m/menit
Raw MaterialLight gauge metalsAll gauges

When to choose C-type:

  • Producing simple, standard fascia profiles
  • Lower production volumes
  • Tighter budget constraints

When to choose O-type:

  • Custom or highly complex panel profiles
  • Higher production volumes
  • Stringent precision and quality demands
  • Frequent profile changeovers

Pros and Cons of Roll Formed Fascia Panels

KeuntunganKeterbatasan
Fast, efficient productionFixed initial tooling investment
Consistent quality and strengthLimited to long, thin panel sizes
Custom profiles and shapesProfiles not as complex as press brake forming
Mengurangi limbah materialSurface finish not as refined as press forming
Low long term operating costsTingkat kebisingan operasional yang keras
Kebutuhan minimal untuk finishing sekunderRequire proper coil stock preparation
Automated process needs few operatorsRegular roll maintenance required
Safer operation than site fabricationComplex troubleshooting specialist skills needed
mesin pembentuk gulungan fasia
Key benefits of fascia roll forming machines 8

Key Takeaways on Fascia Roll Forming Machines

  • Fascia roll formers efficiently produce strong, lightweight seamless fascia panels from metal coil stock for roofs, walls and other uses.
  • They create custom profiles not limited to standard sizes using sequential roll stations.
  • C-type models are compact and economical for simple profiles. O-type machines can produce complex profiles but have higher operational costs.
  • Precision tooling matched to required panel profile and dimensions is vital for quality output.
  • Proper installation, operation and preventive maintenance are key to maximize productivity and lifespan.
  • Choosing a high quality fascia roll former from a reputable technical experts minimizes total long term costs.

FAQ

Q: What metals can be roll formed into fascia panels?

A: Common metals include mild steel, stainless steel, aluminum and zinc. Softer, thinner gauges like 0.4-0.7 mm are preferred for easier forming. Pre-finished metals like color coated steel can also be formed.

Q: What coil stock dimensions are needed?

A: Coil ID of 405-610 mm is typical. Strip width should be 20-50 mm extra than maximum panel width. Thickness ranges from 0.3-1.2 mm generally.

Q: How long are the fascia panels produced?

A: Panel length is adjustable, usually up to 9 meters for easier handling. Extended lengths require coil crimping or end piloting to avoid buckling.

T: Berapa ketebalan lembaran logam yang dapat dibentuk?

A: Roll forming capability is generally 0.3-2.0 mm thickness. Thicker metal requires greater roll station power and more passes to form progressively.

Q: How many panels can be produced per hour?

A: Output depends on machine speed and panel size, but is ~10-20 panels of 1 m x 6 m size per hour typically.

Q: What precision and tolerance is achievable?

A: Roll formed panels offer around +/- 1.0 mm profile precision. Closer tolerances are possible with additional investment in tooling and machine quality.

Q: Does every profile change need new tooling?

A: Yes, dedicated matching upper and lower roller tooling is required to create each different panel profile. Quick change tooling minimizes changeover times.

Q: What is the typical fascia roll former price range?

A: Prices start around $10,000 for basic C-type machines up to over $100,000 for very large or custom high-end O-type machines.

Q: What are the ongoing operation costs?

A: Main costs are labor, power, metal coil raw material, and periodic maintenance or tooling replacement. Efficient fascia roll formers provide low per piece costs at high production volumes.

T: Langkah-langkah keamanan apa yang diperlukan?

A: Safety features like emergency stops, guards, light curtains and two-hand operating buttons protect workers. Proper training and protective gear is essential.

Q: How can I calculate the ROI on a fascia roll former?

A: Calculate per piece cost savings versus other fabrication methods based on machine price, financing, operating costs and production volumes. Efficiency gains shorten ROI period to under 2 years.

ketahui lebih lanjut Roll forming

Daftar isi

Ikuti kami

Bagikan Postingan Ini

Paling Populer

Berhubungan

Ada pertanyaan? Hubungi Kami Sekarang

Pada Kunci

Pos terkait

Mesin Pembuat Pejantan dan Lintasan

Mesin pembuat tiang dan track digunakan untuk membuat tiang dan track logam untuk proyek konstruksi bangunan. Peralatan ini membentuk stud berbentuk C dan track berbentuk U dari lembaran logam yang digulung dalam proses yang berkelanjutan. Sekilas tentang Mesin Pembuat Stud dan Track

Baca selengkapnya "

Mesin Roll Forming Z Purlin

Mesin pembuat gulungan purlin Z digunakan untuk memproduksi purlin berbentuk Z dari gulungan logam. Purlins adalah anggota struktural yang digunakan pada bangunan untuk menopang lembaran atap dan dinding. Bentuk Z memberikan kekuatan dan kekakuan. Mesin roll forming melewati kumparan

Baca selengkapnya "

Mesin Pembuat Bagian Penguat C

Mesin pembuat bagian penyangga C, juga dikenal sebagai mesin pembuat gulungan purlin C, adalah peralatan industri yang digunakan untuk membuat member baja struktural berbentuk C dari strip baja yang digulung. Mesin ini dirancang untuk memproduksi purlins C secara efisien, yang

Baca selengkapnya "

Mesin Roll Forming Plat Kotak

Ikhtisar Mesin pembuat gulungan pelat kotak adalah peralatan khusus yang digunakan untuk memproduksi komponen berbentuk kotak atau elemen struktural dari lembaran atau gulungan logam datar. Mesin-mesin ini banyak digunakan di berbagai industri, termasuk konstruksi, otomotif, dirgantara, dan manufaktur, karena

Baca selengkapnya "