Description

Steel rainspout downspout square downpipe roll forming machine, also named rainwater down pipe roll forming machine, has been designed for making square or round (circle or rectangular) rainwater pipes. Downspout has many names as, waterspout, down pipe, drain spout, and roof drain pipe etc.

Round downspout and rectangular downspout pipe of downspout roll forming machine is very popular in the market.

A downspout (Down pipe) is a pipe for conveying rain water from a roof or gutter to the ground or to a drain, also referred to as Leader pipe, Down pipe, or Drain spout. The downspouts are more and more widely applied in rain water storage solution.

Steel rainspout downspout square downpipe roll forming machine can produce material thickness range 0.5-0.8mm, material PPGI, galvalume steel and galvanized steel, also we can customize the machine according to your drawing.

Steel rainspout downspout square downpipe roll forming machine design is unit one, which means the control box and motor are all put under the machine frame, when you get the machine, no need to assemble and connect the complicate cable of the machine, you only need to connect one main cable, then the machine is working. It saves more time and space.

Profile Drawing

Technical parameter

1. Machine specification: forming thickness 0.5-0.6mm, yield strength≤G550Mpa
2. Forming speed: 5-10M/min (EXCLUDING CUTTING STOP TIME)
3. Diameter of the pipe: as profile
4. Forming roller: about 20 groups
5. Main motor power: 11KW
6. Hydraulic station power:4KW
7. Roller material: 45# forged steel, surface coated with chrome
8. Main shaft material: 45# steel
9. Main axis dia.: ￠68mm
10. Hydraulic cutting pressure: 10-12Mpa
11. Cutting method: hydraulic powered, cutting after roll forming.
12. Cutting blade material: Cr12Mov quenching treatment
13. Electrical controlling system: Whole line adopted PLC control, cut to length tolerance≤2mm

Roll forming line comprised equipment

The Whole downpipe roll forming line comprised of 5T manual uncoiler, main drive, infeed guiding, roll forming machine, straighten device, cutting equipment, hydraulic system, electrical controlling system, output table. Elbow machine and the seaming machine

Flow Chart

Uncoiling – Infeed Guiding– Roll forming – straighten – Hydraulic cutting – Run-out table-elbow-seaming

Product Profile

Downspout elbow bending machine technical data

A. Technical parameters

1. Controlling method: strong current control
2. Main motor power: 2.2KW
3. elbow angle: 90°
4. Additional function: bending end crimping
5. Elbow machine dimension: 1200x650x1400mm

B. Machine photos for reference